Manual Extrusion Welding Gun PFE610A

• The plastic extruder uses a 1300w electric drill imported from Germany’s Metabo as the extrusion motor, with high power, low resistance and strong protection. The dual heating system can independently control the heating temperature of the base material and the welding rod. The welding efficiency is high and the welding seam quality is good. At the same time, it is equipped with welding rod heating digital temperature control display, 360-degree rotating welding nozzle, convenient operation, stable performance, large extrusion capacity, continuous welding, suitable for welding of PE, PP and plastic.

• Provide neutral packaging and small batch customization services.

• Provide small batch customization services for various welding boots.

• The LCD display of the control box is more intuitive and convenient.

• Third-party CE certification test.

• The intelligent control system adopts double protection, drive motor cold start protection, automatic heating temperature compensation, improve the reliability of the extrusion welding gun, try to avoid malfunctions caused by misoperation, and extend the service life of the machine.

Categories: ,


The self-developed intelligent protection function makes you more at ease!

Automatic temperature compensation function

In the process of using the plastic extrusion welding machine, when the temperature of the extrusion screw area changes, the intelligent control system will automatically adjust according to the set temperature.

Drive motor cold start protection

In addition to the built-in overload protection of the drive motor, our self-developed first-time start-up protection function will delay the start for 180 seconds after the digital display temperature reaches the set temperature, thereby maximizing protection and prolonging the working life of the drive motor.

Fault alarm display

Through the fault code, the user can quickly and easily understand the fault location and perform effective detection. Available fault codes corresponding to the table.


Model LST610A
Rated Voltage 230V
Frequency 50/60HZ
Extruding Motor Power 1300W
Hot Air Power 1600W
Welding Rod Heating Power 800W
Air Temperature 20-620℃
Extruding Temperature 50-380℃
Extruding Volume 2.0-3.0kg/h
Welding Rod Diameter Φ3.0-5.0mm
Driving Motor METABO
Body weight 7.2kg
Certification CE
Warranty 1 year


Welding the HDPE geomembrane to the pipe

LST610A type


Download Catalogs.pdf